HP XP P9000 Performance Advisor Software - Manual (Page 171)

The MP busy time indicates the time taken by an MP blade to process the request it receives from
the associated processing type.
rgutil_exportDB-array_serial_number_<file_name>.csv
This file includes the following details:
• The XP or the P9000 disk array serial number for which the report is generated.
• The RAID group IDs on the XP or the P9000 disk array.
• The performance data collection interval time stamps.
• The frontend random read and write I/Os on all the LDEVs in a RAID group over the collection
interval.
• The utilization of the RAID group over the collection interval for writing random and sequential
parity.
• The frontend sequential read and write I/Os on all the LDEVs in a RAID group over the collection
interval.
• The total utilization of a RAID group over a collection interval.
When a RAID group is associated with a ThP pool, this metric provides the extent of RAID group
utilization due to the I/Os occurring on a ThP pool.
jnl_exportDB-array_serial_number_<file_name>.csv
This file includes the following details:
• The XP or the P9000 disk array serial number for which the report is generated.
• The journal group IDs on the XP or the P9000 disk array.
• The performance data collection interval time stamps.
• The MU indicates the mirror unit number.
• The CTG indicates the consistency group Id.
• The JNLS indicates the journal pool status.
• The AP indicates the number of active paths.
• The U(%) indicates the usage rate (%) of the journal data.
• The Q-Marker indicates the latest sequence # for writing to the PVOLs consistency group at the
PAIR state.
• The Q-CNT shows the number of remaining Q-Markers within the journal data.
• The Num indicates the total number of LDEVs configured as the journal volumes.
• The LDEV # indicates the cu:ldev ID that is configured as the journal volume.
HP StorageWorks P9000 Performance Advisor Software User Guide 171