HP StoreVirtual VSA Software - Manual (Page 17)

HP P4000 CLI | Commands | 17
Example
cliq assignVolume volumeName=TheVolume
initiator=iqn.1991-05.com.microsoft:w-gregorio.corp.hp.com
login=10.0.1.2 userName=admin passWord=secret
cliq assignVolume volumeName=TheVolume
initiator=iqn.1991-05.com.microsoft:w-gregorio.corp.hp.com
assignVolumeChap
This command assigns a volume to a server. This assignment sets the access to a volume, using CHAP
authentication.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq assignVolumeChap volumeName= targetSecret= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
volumeName Required The name of the volume
targetSecret Required The CHAP target secret for the volume.
namePrefix Optional A prefix string for newly created objects. A unique number value will be concatenated
to this prefix to guarantee name uniqueness.
accessRights Optional The access rights to the volume: r - read-only, x - no access, rw - read-write (default)
chapName Optional The CHAP name for the volume. If this is not specified, the IQN of the local server is
used (this parameter is required if run on a storage system).
initiatorSecret Optional The CHAP initiator secret for the volume.
vipLoadBalance Optional Use VIP load balancing for this host. This can be one of: 0, 1 - default
exclusiveAccess Optional Remove any previous server access rights to this volume. This can be one of: 0, 1 -
default
Example
cliq assignVolumeChap volumeName=TheVolume targetSecret=ItsASecret
login=10.0.1.2 userName=admin passWord=secret
cliq assignVolumeChap volumeName=TheVolume targetSecret=ItsASecret
assignVolumeToServer
This command assigns a volume to a server.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq assignVolumeToServer volumeName= serverName= login= userName= passWord=