HP StoreVirtual VSA Software - Manual (Page 42)

42 | HP P4000 CLI | Commands
disconnectLocalVolume
This command disconnects a SAN volume from the host.
Availability: Windows
Version: 8.0
Request Syntax
cliq disconnectLocalVolume volumeName=
volumeName Required The name of the volume
Example
cliq disconnectLocalVolume volumeName=z:
discoverTcp
This command discovers storage systems and management groups on the network, using TCP.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq discoverTCP groupOrder= node= login= userName= passWord=
node Required The host names of the storage systems the cluster comprises
groupOrder Optional Return storage systems ordered by group membership. This can be one of: 0 - default, 1
receivePort Optional The TCP port to receive the discovery packets (defaults to an unused port if unspecified)
waitForData Optional The number of milliseconds to wait for the discovery packets (defaults to 3000 if
unspecified)
Example
cliq discoverTCP groupOrder=1 node=10.1.2.3;10.1.2.4 login=10.0.1.2
userName=admin passWord=secret
cliq discoverTCP groupOrder=1 node=10.1.2.3;10.1.2.4
discoverUdp
This command discovers storage systems and management groups on the network, using UDP.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq discoverUdp ipMask= ipSubnet= login= userName= passWord=
ipMask Required An IP adderss mask for SNMP notification.
ipSubnet Required An IP Address subnet for SNMP notification.