Ameriphone CL-40 - Manual (Page 16)

15
Placing Calls
1. Press the TALK button. The IN USE
LED indicator will light up.
2. Listen for a dial tone.
3. Dial the phone number.
4. When you have finished with your
call, press the TALK button again.
The IN USE LED indicator will turn off.
Handset REDIAL Feature
1. If you get a busy tone, press the
TALK button to hang up.
2. Later, press the TALK button again.
3. Listen for a dial tone.
4. Press the RE/PA button. This will
automatically redial the last telephone
number you called.
Using the Headset Feature
Your telephone can utilize a headset (not
included) to be connected to your
HANDSET for you to enjoy a hands-free
communication.
Insert the small plug on the end of the
headset into the HEADSET JACK at the
right side of the HANDSET. Follow the
procedures discussed in “Receiving
Calls”and “Placing Calls”when to
receive and place a call.
Note:
When you plug in the headset plug
into the HEADSET JACK it automatically
mutes the microphone and speaker of
the handset. Unplug the headset to
return the handset normal use.
Headsets are available at most retail
outlets that sell telephone equipment.
The HEADSET JACK is compatible with
2.5 mm headset plugs only.
Cordless Telephone Operation
MICROPHONE
HEADSET
SPEAKER
HEADSET JACK
HEADSET
PLUG
(2.5 mm)
MANUAL(430-0102-)V3.p65 02-10-23, 11:30 15