Miscellaneous category for c compiler – HP Integrity NonStop H-Series User Manual
Page 88
shows the Tool Settings page for a C project with SQL/MX and managed
builds.
Figure 47 Tool Settings tabbed page
When you select the main entry for a tool on the left of the Tool Settings page, the right side of the
page displays the command the tool invokes as well as the options that will be passed to the tool.
To edit options passed to a tool, select one of the categories below the tool on the left. If you don’t
see the option of interest, use the Miscellaneous category for the tool to add the option.
NOTE:
Options for settings, such as for the Deploy tool or arguments to –Wsqlhost and similar
options are shown as disabled on the Tool Settings page (due to a CDT limitation). To change
values for remote options, use the Settings (Remote) property page.
If, for example, you want to pass –WIEEE_float to the C Compiler tool for TNS/E, perform the
following steps from the NonStop Development perspective:
1.
Select the project of interest in the NonStop Project Explorer view.
2.
Select Properties from the NonStop Project Explorer view context menu.
3.
In the Properties dialog, select C/C++ Build > Settings.
4.
In the Configuration: combo box, select [ All configurations ] so that changes you make will
be applied to all build configurations (see
).
5.
In the Tool Settings tabbed page, select the Miscellaneous category under C Compiler (TNS/E).
Figure 48 Miscellaneous category for C compiler
88
Tasks