HP McDATA 4Gb SAN Switch for HP BladeSystem p-Class User Manual
Page 120
120 Command Line Interface
The following is an example of how to upload a configuration backup file (configdata) from the
workstation to the switch, and then restore the configuration.
#> ftp symbolic_name or ip_address
user: images
password: images
ftp> bin
ftp> put configdata
ftp> quit
McDATA4GbSAN #> admin start
McDATA4GbSAN (admin) #> config restore
The switch will be reset after restoring the configuration.
Please confirm (y/n): [n] y
Alarm Msg: [day month date time year][A1005.0021][SM][Configuration is
being restored - this could take several minutes !]
Alarm Msg: [day month date time year][A1000.000A][SM][The switch will be
reset in 3 seconds due to a config restore]
McDATA4GbSAN (admin) #>
Alarm Msg: [day month date time year][A1000.0005][SM][The switch is being
reset]
Good bye.
See also