HP CD52 External CD-Writer Series - Manual (Page 7)

NeroVision Express 2 Installing NeroVision Express 2 • 7
2.2 Installing from CD
Step 1: Insert the NeroVision Express 2 CD-ROM into your CD/DVD drive on
your PC.
If you have a feature called 'Autorun' activated, this will start your installation
process automatically.
If you do not have 'Autorun' activated, you can go to My Computer > Click on
the drive letter of the CD/DVD drive > click setup.exe
Step 2: Follow prompts until you are finished installing the software.
NOTE: NeroVision Express 2 works with the same serial number as Nero
Burning ROM and/or Nero Express. If Nero Burning ROM and/or Nero Express
are already installed on your system, you do NOT need to enter a NeroVision
Express 2 serial number. If you have no serial number, you can get one at
www.nero.com
Some versions of NeroVision Express 2 that are delivered together with the
hardware (OEM versions) may have an integrated serial number, in which case
you will also not be requested to enter a serial number. Simply enter your name
and company to personalize your software. Then click OK.
Step 3: Restart your PC.
2.3 Uninstalling NeroVision Express 2
Step 1: Go to Start > Control Panel > Add or Remove Programs.
In some operating systems, you will find - Start > Settings > Control Panel.
Step 2: Select NeroVision Express 2 in the Add or Remove Programs window
and click 'Remove'.
Step 3: In some cases, you will find that when removing software, there will be one
or two files that the operating system will ask if you want them removed since they
may be shared by other programs. If you are unsure, always opt to keep these
files.