Replace print cartridges, Ink-backup mode, Ink-backup mode output exit ink-backup mode – HP Deskjet D2445 Printer User Manual

Page 18

Advertising
background image

Replace print cartridges

When buying print cartridges, look for the print cartridge selection number.
You can find the selection number in three places:

Selection number label: Look at the label on the print cartridge that you are replacing.

1 Selection number label

Printer documentation: For a list of print cartridge selection numbers, see the
reference guide that came with the printer.

Print Cartridge Ordering Information dialog box: For a list of print cartridge selection
numbers, open the printer

Toolbox

, click the Estimated Ink Level tab, and then click

the Print Cartridge Information button.

If a print cartridge runs out of ink, the printer can operate in ink-backup mode. For more
information, see

Ink-backup mode

.

For information about installing a replacement print cartridge, see

Installation instructions

.

Ink-backup mode

In the ink-backup mode, the printer operates with only one print cartridge. The ink-backup
mode is initiated when a print cartridge is removed from the print cartridge cradle.

NOTE:

When the printer operates in ink-backup mode, a message is displayed on

screen. If the message is displayed and two print cartridges are installed in the printer,
verify that the protective piece of plastic tape has been removed from each print
cartridge. When plastic tape covers the print cartridge contacts, the printer cannot
detect that the print cartridge is installed.

Chapter 3

16

Get started

Advertising