HP Officejet 2621 All-in-One Printer User Manual

Page 76

Advertising
background image

3.

Gently pull the paper out of the rollers.

CAUTION:

If the paper tears when you are removing it from the rollers, check the rollers and

wheels for torn pieces of paper that might remain inside the printer. If you do not remove all the

pieces of paper from the printer, more paper jams are likely to occur.

4.

Close the cover of the ADF, pressing down firmly until it snaps into place.

5.

Press the OK button on the control panel to continue the current job.

If the above solutions do not resolve the problem,

click here for more online troubleshooting

.

Prevent paper jams

Do not overfill the input tray.

Remove printed papers from the output tray frequently.

Ensure that paper loaded in the input tray lays flat, and the edges are not bent or torn.

Do not combine different paper types and paper sizes in the input tray; the entire stack of paper

in the input tray must be the same size and type.

Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the

paper-width guide does not bend the paper in the input tray.

Do not force paper too far forward in the input tray.

Do not add paper while the printer is printing. If the printer is about to run out of paper, wait until

the out of paper message appears before adding paper.

If the above solutions do not resolve the problem,

click here for more online troubleshooting

.

72 Chapter 9 Solve a problem

ENWW

Advertising