Alpine CDE-9850Ri - Manual (Page 49)

19
-EN
01GB05CDA-9854R.fm
ALPINE CDE-9850Ri 68-04123Z56-A (EN)
• The unit scrolls CD text names, folder names, file names or tag
display.
Demonstration
This unit has a demonstration feature for the display.
• To quit Demo mode, set to DEMO OFF.
Playing MP3/WMA Data (PLAY MODE)
This product can playback CDs containing both CD and MP3/WMA
data. However, in some situations (some enhanced CDs), playback may
be difficult. For these special cases, you can select playback of CD data
only. When a disc contains both CD or the MP3/WMA data, playback
starts from the CD data portion of the disc.
• Perform this setting before inserting a disc. If a disc has already been
inserted, perform the setting after you remove the disc.
Connecting to an External Amplifier
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
• No sound is produced by the system when the power output is set to
OFF.
DEMO ON / DEMO OFF (Initial setting)
MP3/WMA
CDDA (Initial setting) / CDDA/MP3
CDDA : Only CD data can be played back.
CDDA/MP3 : Both CD data and MP3/WMA file tracks can be
played back.
External Device
POWER IC ON (Initial setting) / POWER IC OFF
POWER IC OFF : Use this mode when the front pre-amplifier of
the unit is used to drive an external amplifier
connected to the speakers. In this setting, the
head unit’s internal amplifier has no output to
drive speakers.
Amplifier
Front
left
Front
right
POWER IC ON : The speakers are driven by the built-in
amplifier.
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left
01GB00CDA-9854R.book Page 19 Wednesday, October 19, 2005 8:21 AM