HP NonStop G-Series - Manual (Page 98)

Switch Command Interface (SWCI)
ServerNet Nomadic Disk User’s Guide—425485-001
6- 34
Command Execution Error Messages
Cause. An an error occurred during an attempt to read the command file. err-num is
the Guardian file-system error number that occurred.
Effect. The command file is not executed.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for recovery
from the file-system error.
Cause. An error occurred during an attempt to read the switch module device.
err-num is the Guardian file-system error number that occurred.
Effect. The command is not executed. SWCI waits for the next command.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for recovery
from the file-system error. Then retry the command.
Cause. An error occurred during the wait for a response message from the SCC for a
previously issued SWITCH command.
err-num is the Guardian file-system error
number that occurred.
Effect. The command is not executed. SWCI waits for the next command.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for recovery
from the file-system error. Then retry the command.
Cause. An error occurred during an attempt to send a command through the device to
the attached SCC.
err-num is the Guardian file-system error number that occurred.
Effect. The command is not executed. SWCI waits for the next command.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for recovery
from the file-system error. Then retry the command.
***ERROR*** Guardian error err-num on access to obey file
file-name.
***ERROR*** Guardian error err-num on read of switch comm
port.
***ERROR*** Guardian error err-num while awaiting switch
response.
***ERROR*** Guardian error err-num while sending switch
command.