HP ProLiant DL380 G5 Server User Manual
Page 52
Hardware options installation 52
WARNING:
To reduce the risk of personal injury or damage to the equipment, the installation
of power supplies should be performed only by individuals who are qualified in servicing
server equipment and trained to deal with products capable of producing hazardous energy
levels.
WARNING:
To reduce the risk of personal injury from hot surfaces, observe the thermal labels
on each power supply or module.
WARNING:
To reduce the risk of injury from electric shock hazards, do not open power
supplies. Refer all maintenance, upgrades, and servicing to qualified personnel.
CAUTION:
Do not run the server with one AC power supply and one DC power supply
installed.
CAUTION:
Electrostatic discharge (ESD) can damage electronic components. Be sure that you
are properly grounded (earthed) before beginning any installation procedure.
To install the component:
1.
Remove the power supply blank.
WARNING:
To reduce the risk of electric shock or damage to the equipment, do not connect
the power cord to the power supply until the power supply is installed.