HP Storage Essentials Enterprise Edition Software - Manual (Page 646)

Path Provisioning 608
2. Select the storage system on which you want to create the metavolume.
NOTE: The S column heading in the Storage Systems pane means that only a single
selection is allowed.
3. Click the Step 1 button below the pane.
The selected storage system’s name is displayed below the Storage System pane. The Host pane
is populated. Notice in ” Selecting a Storage System ” on page 608 that some hosts have a red X
over their icon. This means the host is not accessible.
Figure 110 Selecting a Storage System
Step 2 - Select a Host
Keep in mind the following:
• If you select host and storage ports that belong to an existing zone alias and you have the
Display Zone Aliases option selected in Customize Zone Options dialog box, the existing zone
alias is automatically selected and highlighted.