Suspending pairs – HP StorageWorks XP Remote Web Console Software User Manual
Page 78
Suspending Pairs
The Suspend Volume Pair dialog box (see
) allows you to suspend the pairs.
Figure 34 Suspend Volume Pair Dialog Box
The Suspend Volume Pair dialog box consists of the following components.
•
Suspend Volume Pair Volume List
The Volume List located on the upper side of the Suspend Volume Pair panel displays the
following information pertaining to the S-VOL and T-VOL of the pair you want to suspend:
◦
S-VOL: The LDKC:CU:LDEV of the S-VOL.
An LDEV number that ends with a pound or get symbol (#) indicates that the LDEV is an
external volume (for example, 00:00:01#). For details regarding the external volumes,
see the HP XP24000/XP20000 External Storage Software User's Guide.
◦
Status: The pair status displays.
◦
T-VOL: The LDKC:CU:LDEV of the T-VOL.
An LDEV number that ends with a pound or gate symbol (#) indicates that the LDEV is an
external volume (for example, 00:00:01#). For details regarding the external volumes,
see the HP XP24000/XP20000 External Storage Software User's Guide.
◦
Emulation: The emulation type of the S-VOL and T-VOL.
◦
Capacity(Cyl): The number of cylinders assigned to the volume.
◦
CLPR(S): The cache logical partition of the S-VOL.
◦
CLPR(T): The cache logical partition of the T-VOL.
•
The OK button adds the operation settings to suspend the selected pairs displayed in the
Suspend Volume Pair Volume List to the Preview List in the Pair Operation window.
You must click Apply in the Pair Operation window to apply the Suspend Volume Pair operation
settings displayed in the Preview List to the storage system.
•
The Cancel button cancels the operations set in the Suspend Volume Pair dialog box and closes
the dialog box.
To suspend one or more SIz pairs:
1.
Go to the Pair Operation window, and select the desired CU image or S-VOL in the Tree to
filter the volumes displayed in the Volume List.
2.
Select the pairs that you want to suspend (or the volumes whose pairs you want to suspend),
right-click the selected pairs to display the menu, and then select the Suspend Pair command
to open the Suspend Volume Pair dialog box.
78
Performing ShadowImage for Mainframe Operations Using Remote Web Console