HP L2045w 20-inch Widescreen LCD Monitor - Manual (Page 19)

3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position.
WARNING! A lock-down/release button on the front of the column prevents the display head from
sliding up when the monitor is lifted. If the display head is locked in the lowest height position:
a. Make sure that the monitor is safely positioned on a stable surface.
b. Gently push down on the display head.
c. While pushing down the display head, press the lock-down/release button on the front of the
column.
d. Guide the display head up to the desired height.
CAUTION: To prevent damage to the monitor, be sure not to lower it onto objects in the pedestal
base tray.
Figure 3-10 Adjusting the Height
NOTE: The monitor features two sets of VESA 100mm mounting holes. Use the top mounting
holes to allow the display head to be lowered 18.05 mm closer to the table surface, when used in
landscape mode.
Adjusting the Monitor 11