HP 3PAR T-Class Storage Systems - Manual (Page 124)

3PAR InForm Management Console 4.1.0 User’s Guide
124 320-200231 Rev A
Mode Change
Indicates whether port mode change from initiator to
target or vice versa is Allowed or Prohibited. This
setting is configured using the InForm CLI command
controlport.
Hosts
The number of hosts connected to the port. This is
only displayed if the port is connected to hosts.
Physical
Disks
The number of physical disks connected to the port.
This is only displayed if the port is connected to drive
cages.
Link State
The current state of the link. Displayed if the port is
an RCFC port.
Remote Node
WWN
The node WWN. Displayed if the port is an RCFC port.
Remote Port
WWN
The port WWN. Displayed if the port is an RCFC port.
iSNS Settings
(displayed for
iSCSI ports - not
shown)
Primary IP
Address
Primary Internet Storage Name Service (iSNS) server
IP address. iSNS protocol allows for automated
discovery, management, and configuration of iSCSI.
Secondary IP
Address
Secondary iSNS server IP address.
TCP Port
The port on the iSNS server with which to
communicate.