HP XP20000XP24000 Disk Array - Manual (Page 75)

Figure 36 Audit Log Transfer Window
Description Item
Specify whether to transfer the audit log file to the primary FTP server.
•
Enable: Transfers the file.
• Disable: Does not transfer the file.
Output to Primary Server
Set an IP address for the primary FTP server. Once you set Output to Primary Server to
Enable, IP becomes available. The default IP address has been entered, so change it as
needed.
You can set either an IPv4 address or an IPv6 address for IP address. However, only an
IPv4 address is available when the operating system of your SVP is Windows XP.
•
To set an IPv4 address, select IPv4. For IP, enter four integers in the range of 0 to
255 (for example, nnn.nnn.nnn.nnn, where n is a number). Only enter numbers.
Do not enter the intervening periods.
•
To set an IPv6 address, select IPv6. For IP, enter eight hexadecimal numbers in the
range of 0 to FFFF (for example, hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh,
where h is a hexadecimal digit). Only enter hexadecimal numbers. Do not enter the
intervening colons.
Primary Server Setting
Set the UserID and Password to log in to the primary FTP server. Enter up to 256
alphanumeric characters and symbols (ASCII codes) for the user ID and password. Primary Server Login User
Set the folder location to save the audit log file. The folder location should be relative to
a home directory of an FTP server user. The default setting (/) is the home directory. Enter
up to 256 alphanumeric characters and symbols (ASCII codes) for the output folder. Primary Server Output
Folder
When you click Transfer, the audit log file is transferred to the primary FTP server
according to the settings selected on the Audit Log Transfer window. You can transfer
the current audit log file without waiting for the audit log file to reach the threshold size
for automatic transfer. Transfer to Primary Server
Audit Log Transfer Window 75