HP XP Command View Advanced Edition Software - Manual (Page 134)

Command line interface commands
134
Table 4-46 GetStorageArray (subtarget=Port) command parameters
Parameter Name Status Description
portsubinfo Optional Specific information about the ports
The values you can specify are WWN, WWNGroup, LUNGroup, or
HostStorageDomain
. If you specify multiple values at the same time,
separate the values by commas.
wwngroupsubinfo
# Optional Information obtained from a WWN group
Specify WWNGroup in the parameter portsubinfo when using this
parameter. The value you can specify is WWN only.
lungroupsubinfo
# Optional Information obtained from a LUN group
Specify LUNGroup in the parameter portsubinfo when using this
parameter. The value you can specify is Path only.
pathsubinfo
# Optional Information obtained from paths of a LUN group
Specify Path in the parameter lungroupsubinfo when using this
parameter. The value you can specify is WWN or WWNGroup.
portfilter Optional Type of port about which you want to obtain information
The values you can specify are LCP, Fibre, SCSI, NAS, and ISCSI.
If you specify multiple values at the same time, separate the values by
semicolons (;).
# This can only be specified for XP512/XP48.
Command execution example: In this example, the CLI command obtains information about a port
(port number: 0) in a subsystem (serial number: 10001, model: XP512) including WWNs, WWN
groups, LUN groups, and the host storage domain.
hdvmcli GetStorageArray -o "D:\logs\XP512 GetStorageArray_Port.log"
subtarget=Port model=XP512 serialnum=10001 port=0
portsubinfo=WWN,WWNGroup,LUNGroup,HostStorageDomain wwngroupsubinfo=WWN
Command execution result:
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 Port elements:
An instance of Port
objectID=*****
portID=0
portType=Fibre
fibreAddress=EF
topology=Fabric(off), FC-AL
displayName=CL1-A
lunSecurityEnabled=true
controllerID=1
worldWidePortName=50.06.0E.80.03.3A.99.00
channelSpeed=1
portRole=Target
slprNumber=-1
List of 2 WWN elements:
An instance of WWN
WWN=00.00.00.00.00.00.00.01