HP StorageWorks 3000 RAID Array - Manual (Page 72)

3-10 RAID Array 3000 Controller Shelf Hardware User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Controller Shelf Hardware User’s Guide Comments:
Part Number: EK-SMCPQ-UG. D01 File Name: d-ch3 Installation and Maintenance.doc Last Saved On: 12/4/00 1:08 PM
10. Install two shelf retainer brackets (item 1, Figure 3-5) to the left and
right rails of the cabinet and secure with two screws. The controller
shelf is now safely mounted in the cabinet.
Figure 3-5. RETMA cabinet shelf supports
Installing UPS Brackets
The shelf brackets that support and secure the UPS in the cabinet are a custom
design. The following procedure describes how to install the rack-mount
brackets. It applies to both cabinet designs – RETMA and metric. You will
need the following items to properly install the UPS brackets in your style
cabinet:
■ 2 UPS rack-mount brackets (74-53154-01 and -02)
■ 1 bag (Table 3-3 lists contents) of mounting hardware (99-06557-05)
■ Phillips-head screwdriver