HP LaserJet 9050 Printer series User Manual
Page 32
26 Configuring the product from the Settings screens
ENWW
5
Where applicable, set the threshold value for the individual alerts.
The threshold value for service alerts and for the paper-path alerts is a user-specified
number of minutes. This is the amount of time that an event will be ignored before an e-mail
alert message is sent. For example, you might want to set the threshold value for the “Tray
Open” alert to 10 minutes to allow someone to close the tray after loading the tray or clearing
a jam.
6
Select the attachments that you want to be included with your e-mail alert messages. These
attachments can include Supplies Status Page, Usage Page, Configuration Page, Event Log
Page, and XML Data. (Go to the Information tab to see examples of the pages.) The XML
Data option should be selected if one of the destinations you have chosen to receive alerts is
an automated computer system. Each item that you select will be attached to the e-mail. For
example, if you select Usage Page and Event Log Page, you will receive one e-mail
message with two attachments, one for each selection. If you also select the XML Data
option, you will receive one e-mail message with three attachments—one attachment for the
Usage Page in HTML, one for the Event Log in HTML, and a third consisting of instant
support information in a text file attachment that has an .XML extension.
7
Click Apply to save the information.
8
Repeat steps 1 through 7 for each additional list or destination.
Note
To test the configuration of a destination list, see