11 wireless connection, Configure and use 802.11 wireless profiles, 11 wireless – HP Officejet H470wf Mobile Printer User Manual

Page 54: Connection

Advertising
background image

To uninstall from a Windows computer, method 3

NOTE: Use this method if Uninstall is not available in the Windows Start menu.

1. Insert the device Starter CD into your computer's CD-ROM drive, and then start

the Setup program.

2. Disconnect the device from your computer.
3. Select Uninstall and follow the onscreen directions.
4. Restart your computer.

NOTE: It is important that you disconnect the device before restarting your
computer. Do not connect the device to your computer until after you have
reinstalled the software.

5. Start the Setup program for the device again.
6. Select Install.
7. Follow the onscreen instructions and also see

To install the software before

connecting the device (recommended)

.

To uninstall from a Macintosh computer
1.
Launch HP Device Manager.
2. Click Information and Settings.
3. Select Uninstall your HP Software from the pull-down menu.

Follow the onscreen instructions.

4. After the software is uninstalled, restart your computer.
5. To reinstall the software, insert the device Starter CD into your computer's CD-

ROM drive.

6. On the desktop, open the CD-ROM, and then double-click HP Installer.
7. Follow the onscreen instructions and also see

To install the software

.

802.11 wireless connection

This section describes how to set up and configure the device for an 802.11 wireless
connection. The recommended method for setting up this mobile device for wireless
communication with a single computer is using an “ad hoc” network. However, you
might want to set it up on an existing “infrastructure” network that uses a wireless
access point (WAP). For an overview of 802.11 wireless printing, see

About 802.11

.

NOTE: 802.11 printing is available through 802.11 wireless printer accessories
that are included with certain device models. For a description and illustration of
the 802.11 wireless printer accessory, see

Install and use 802.11 and Bluetooth

accessories

. Also, the sending device must have built-in 802.11 capability or an

802.11 wireless card installed.

About the wireless profile switch

About 802.11 wireless network settings

Set up for 802.11 using factory defaults

Set up for 802.11 on existing (non-default) networks

Configure and use 802.11 wireless profiles

Chapter 4

50

Configure and manage

Advertising