Connecting controller and mixed drive enclosures, Additional cable requirements for drive enclosures, P2000 g3 msa system cable requirements – HP MSA Controllers User Manual

Page 25

Advertising
background image

HP P2000 G3 FC/iSCSI MSA System User Guide

25

Connecting controller and mixed drive enclosures

P2000 G3 MSA System controller modules support cabling of 3Gb and 6Gb SAS link-rate LFF and SFF

expansion modules — in mixed fashion — as shown in

Figure 10

on page 32, and as further described

in

Additional cabling considerations

(below); the HP P2000 G3 MSA System Cable Configuration Guide;

and HP white papers (listed on the following page).

Additional cable requirements for drive enclosures

IMPORTANT:

When installing SAS cables, use only supported SAS 4x cables with connectors supporting your

application (6Gb, 3Gb, or both).

Mini-SAS to mini-SAS 0.5m cables are provided with each of the following drive enclosures (one per

expansion module): P2000 6Gb 3.5" 12-drive enclosure and D2700 6Gb drive enclosure.

If additional or longer cables are required, they must be ordered separately (see relevant MSA2000

G2 Quickspecs or P2000 G3 Quickspecs for your products).

The maximum cable length allowed in any configuration is 2m.

When expanding storage capacity, a maximum of eight enclosures — including the controller

enclosure — or one hundred forty nine (149) disk drives are allowed in the array.

P2000 G3 MSA System cable requirements

Figure 1

(below) and

Table 4

on page 27 jointly describe cabling requirements and connection

combinations for P2000 G3 MSA System components. Components are labeled with back-end SAS data

rates and other relevant attributes. Simplified IOM face plates are shown.

Figure 1

P2000 G3 MSA System component connection combinations

Table 3

below provides SAS cable requirements for connection combinations between MSA controller and

expansion modules.

Table 4

on page 27 provides details for cabling expansion modules.

NOTE:

Check Quickspecs addressing your respective product with regard to cabling. Quickspecs can be

found from your HP MSA products page

http://www.hp.com/go/p2000

. Quickspecs links are located

on the right.

P2000 G3 Controller Enclosure

6Gbps

6Gbps

3Gbps

3Gbps

LFF

SFF

6Gbps

MSA70 3Gb IOM

P2000 6Gb IOM

D2700 6Gb IOM

MSA2000 3Gb IOM

D2700

P2000 6Gb

MSA70 MSA2000

D2700

P2000 6Gb

MSA70 MSA2000

D2700*

P2000 6Gb*

MSA70 MSA2000

MSA2000

*Cabling a 6Gbps drive enclosure behind the MSA70 3Gb drive enclosure will adjust its link-rate speed to 3Gbps

.

SAS2.0

SAS2.0

SAS1.1

SAS1.1

Advertising
This manual is related to the following products: