Connecting switch attach configurations, Connecting remote management hosts, Two servers/one hba per server/dual path – HP MSA Controllers User Manual

Page 40: Dual controller configuration, Two servers/two switches

Advertising
background image

40

Connecting hosts

Two servers/one HBA per server/dual path

Connecting switch attach configurations

Dual controller configuration

Two servers/two switches

Connecting remote management hosts

The management host directly manages systems out-of-band over an Ethernet network.

1.

Connect an RJ-45 Ethernet cable to the network management port on each P2000 G3 MSA System

controller.

2.

Connect the other end of each Ethernet cable to a network that your management host can access

(preferably on the same subnet).

NOTE:

Connections to this device must be made with shielded cables – grounded at both ends – with

metallic RFI/EMI connector hoods, in order to maintain compliance with FCC Rules and Regulations.

6G

b

/

s

6G

b

/

s

6G

b

/

s

6G

b

/

s

S

erver 1

S

erver 2

S

erver 1

S

erver 2

6G

b

/

s

6G

b

/

s

If using FC host ports instead of the iSCSI ports shown, then connect cables from

each switch to the relevant FC port, instead of the iSCSI port.

S

erver 1

S

erver 2

S

witch A

S

witch B

Advertising
This manual is related to the following products: