HP Integrated Lights-Out 2 - Manual (Page 126)

16.100.226.32. If you set the interconnect bay EBIPA range to 16.200.139.51 to 16.209.139.58,
the interconnect module management port in interconnect bay #1 is assigned 16.200.139.51
and the interconnect module management port in interconnect bay #7 is assigned 16.200.139.57.
To enable EBIPA settings for the server bays in this enclosure, select Enable Enclosure Bay IP
Addressing for Server Bay iLO 2 Processors, then enter the following information.
Description Possible value Field
Beginning IP address for the device or
interconnect bays. Click the arrow next to the ###.###.###.### where ### ranges from
0 to 255 Beginning Address
Beginning Address field, and click Update List
to update the Device List or Interconnect List.
Subnet mask for the device or interconnect bays ###.###.###.### where ### ranges from
0 to 255 Subnet Mask
Gateway address for the device or interconnect
bays ###.###.###.### where ### ranges from
0 to 255 Gateway
The domain name for the device or interconnect
bays A character string, including all
alphanumeric characters and the dash (-) Domain
The IP address for the primary DNS server ###.###.###.### where ### ranges from
0 to 255 DNS Server 1
The IP address for the secondary DNS server ###.###.###.### where ### ranges from
0 to 255 DNS Server 2
The IP address for the tertiary DNS server ###.###.###.### where ### ranges from
0 to 255 DNS Server 3
The IP address of the primary server used to
synchronize time and date using the NTP
protocol ###.###.###.### where ### ranges from
0 to 255 NTP Server 1
The IP address of the secondary server used to
synchronize time and date using the NTP
protocol ###.###.###.### where ### ranges from
0 to 255 NTP Server 2
126 Using iLO 2