HP ProLiant DL160 Gen8 Server - Manual (Page 93)

Specifications 93
Rated input frequency 50 Hz to 60 Hz
Rated input current 9 A to 4.5 A
Rated input power 831 W at 115V AC input
808 W at 230V AC input
Btus per hour 2878 at 100 V AC
2834 at 115 V AC
2769 at 200 V AC
2758 at 230 V AC
Power supply output —
Rated steady-state power 750 W at 100 V to 120 V AC
input
750 W at 200 V to 240 V AC
input
Maximum peak power 750 W at 100 V to 120 V AC
input
750 W at 200 V to 240 V AC
input
HP 750 W DC CS HE power supply (94% efficiency)
Specification Value
Input requirements —
Rated input voltage -36 V DC to -72 V DC
-48 V DC nominal input
Rated input current
23 A at -36 V DC input
17 A at -48 V DC input, nominal
input
11 A at -72 V DC input
Rated input power (W) 815 W at -36 V DC input
805 W at -48 V DC input, nominal
input
795 W at -72 V DC input
Rated input power (Btus per
hour) 2780 at -36 V DC input
2740 at -48 V DC input, nominal
input
2720 at -72 V DC input
Power supply output —
Rated steady-state power (W) 750 W
Maximum peak power (W)
750 W
CAUTION: This equipment is designed to permit the connection of the earthed conductor of the
DC supply circuit to the earthing conductor at the equipment.
If this connection is made, all of the following must be met:
• This equipment must be connected directly to the DC supply system earthing electrode
conductor or to a bonding jumper from an earthing terminal bar or bus to which the DC supply
system earthing electrode conductor is connected.
• This equipment must be located in the same immediate area (such as adjacent cabinets) as any
other equipment that has a connection between the earthed conductor of the same DC supply
circuit and the earthing conductor, and also the point of earthing of the DC system. The DC