HP NC550SFP Dual Port 10GbE Server Adapter - Manual (Page 26)

Configuring and managing iSCSI targets 26
2. From the Ping Target menu, enter the IP address of the target you want to ping, tab to Ping and press
Enter.
3. If your ping is unsuccessful you will receive a failed message. Otherwise, you are notified that your
ping is successful.
The following is an example of a Successful Ping.
After you have added your target, you should see the target status as Connected on the iSCSI
Configuration menu. If the target is listed as Disconnected, ping the target from the Edit/Ping iSCSI
Target menu.
If ping is successful but you are unable to access the target, check the initiator name and target
name and make sure they are properly specified and that the target ACL can verify the initiator IQN.