HP ProLiant WS460c Gen8 Graphics Server Blade - Manual (Page 18)

Operations 18
o DIMM baffle (right side)
Remove the SAS controller
1. Power down the workstation blade (on page 14 ).
2. Remove the workstation blade (on page 15 ).
3. Remove the access panel (on page 16 ).
4. Disconnect the capacitor pack cabling, if connected (" FBWC capacitor pack cabling " on page 64 ).
CAUTION: Always remove the SAS controller before removing the drive cage.
CAUTION: Always be sure that both captive screws are disengaged before removing the SAS
controller. Failure to disengage the screws may result in damage to the SAS controller or the SAS
backplane and bracket.