HP Modular Cooling System - Manual (Page 11)

Installation 11
IMPORTANT: Do not connect the power cords into a power supply.
8. Plug the primary power cord into the power connector on the left at the transfer switch inside the MCS
5042 unit.
WARNING: To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
• Unplug the power cord from the power supply to disconnect power to the equipment.
• Do not route the power cord where it can be walked on or pinched by items placed against it.
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from
the storage system.
9. If you are using a secondary power cord, plug it into the power connector on the right.