Processor option – HP ProLiant BL2x220c G5 Server-Blade User Manual
Page 30
Hardware options installation 30
20.
Install the cable shield.
21.
Install the server A USB key, if removed.
CAUTION:
Route the cache module battery cables so that they do not become pinched when
the server B assembly is installed.
22.
Install the server B assembly ("
23.
Install the server blade ("
Processor option
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To avoid damage to the system board:
•
Do not touch the processor socket contacts.
•
Always install the processor socket cover after removing the processor from the socket.
•
Do not tilt or slide the processor when lowering the processor into the socket.
CAUTION:
To avoid damage to the processor:
•
Handle the processor only by the edges.
•
Do not touch the bottom of the processor, especially the contact area.
CAUTION:
To prevent possible server malfunction and damage to the equipment,
multiprocessor configurations must contain processors with the same part number.
CAUTION:
To prevent possible server blade overheating, always populate processor socket 2
with a processor and a heatsink or a processor socket cover and a heatsink blank.