HP Storage Mirroring V5.1 Software - Manual (Page 12)

5 - 2
2. User name—Enter the user name for the account that will access the source server.
3. Password—Enter the password that is associated with the user account.
4. Storage Mirroring port—If you have changed the default port (6320) used by the Storage
Mirroring server, specify the port.
5. After all fields have been completed, click Next. A window will display the progress as the
Storage Mirroring Virtual Recovery Assistant console authenticates the source server.
Select volumes to protect
Select the volumes you want to protect to the target virtual machine. By default, the system volume
will be selected.
You can specify the size of the selected volume on the replica virtual machine.
1. Select the name of the volume in the Volume table.
2. Enter a value in the Size of the selected volume on the replica virtual machine field.
3. Use the drop-down box to select whether the value is in MB or GB.
4. After you have entered information for the selected volume, click Update.
5. Repeat this process to configure the size of additional volumes on the replica virtual machine.
NOTE: The user account specified must have Storage Mirroring Admin privileges on the
source server.
NOTE: Storage Mirroring Virtual Recovery Assistant can protect a maximum of 14 source
volumes per SCSI controller installed on the Virtual Recovery Appliance virtual machine.
Consult your VMware ESX documentation to determine how to install additional SCSI
controllers on the Recovery Appliance.