HP 12000 Virtual Library System EVA Gateway - Manual (Page 26)

d. Enter the Host name (preferably the VLS hostname), enter or select one of the WWPNs
(noted in the previous step) in the Port WW Name box on the VLS Gateway, and select
Linux for the Host OS (
Figure 3 (page 26) ).
NOTE: If a WWPN is not in the Port WW Name box, there may be a zoning error.
After creating the host entries, verify that your zoning is correctly configured.
Figure 3 Add a Host window
e. Click on Add Host.
f. From the Storage tab navigation tree, select the host you just added.
g. Click on the Ports tab in the status pane.
h. Click on Add port, select one of the VLS Gateway WWPNs (noted in the previous step)
from the pull-down list or type one of the appropriate WWPNs, then click Add port
(
Figure 4 (page 26) ).
Figure 4 Add a Host Port window
i. Continue to add ports until all of the ports on the VLS Gateway are added and are listed
on the Host Properties screen in the status pane.
26 Storage Configuration