HP Identity Driven Manager Software Series - Manual (Page 157)

4-17
Using the Secure Access Wizard
Using Secure Access Wizard
Unauth-vid - The VLAN to which the port is assigned when the user has
not been authorized by MAC authentication. Valid values are any
defined VLAN, the default value is VLAN 1.
Auth-vid
- The VLAN to which the port is assigned when the user has
been authorized by MAC authentication. Valid values are any defined
VLAN, the default value is VLAN 1.
If a device does not support the selected setting, the value you set will
appear in the SAW display, but will not be configured on that device.
d. Click OK to save the advanced settings and close the window.
e. Click Next in the configuration window to continue to the
Authentication Servers step.
18. The next step for configuring Secure Access Settings is to define the
Authentication Servers that will be used.
Figure 4-14. Secure Access Wizard, RADIUS Servers configuration
The Authentication Servers step lets you enter the IP addresses of the RADIUS
servers to be used for authentication. Most ProCurve devices support three
RADIUS server, but some, such as the wireless products, supports only two.
a. Click the check box for a RADIUS server to enable the server IP
address field, and then enter the IP address for the server.
The IP address will be validated. If it is invalid or a duplicated IP, a
text message indicating the error is displayed. You cannot continue
until a valid IP address is entered.