HP 3PAR System Reporter Software - Manual (Page 146)

The following example specifies that only 10K RPM disks are to be included:
&seldiskspeed=10
seldomain
Use the seldomain option to select a domain according to the domain name.
value:
Specify one or more of the following:
--ALL Domains--
(Default). Does not exclude any domain based on domain names.
<domain_name>
This value consists of a storage server domain name.
example:
The following example shows two ways to specify that no domain be excluded based on host
name:
&seldomain=OR&seldomain=--All%20Domains--
The following example specifies including only VLUNs belonging to domain domain1:
&seldomain=domain1
The following example specifies including only VLUNs belonging to domain domain1 or domain2:
&seldomain=domain1&seldomain=domain2
selhost
Use the selhost option to select a host according to the host name.
value:
Specify one or more of the following:
--ALL Hosts--
(Default). Does not exclude any hosts based on host names.
<host_name>
This value consists of a storage server host name.
example:
The following example shows two ways to specify that no hosts be excluded based on host name:
&selhost=
OR
&selhost=--All%20Hosts--
146 Web Queries