HP LaserJet 1022n Printer - Manual (Page 13)

Printer control panel
The printer control panel is composed of three lights and two buttons. The
HP LaserJet 1022nw printer has an additional light at the top of the control panel. These
lights produce patterns that identify your printer's status.
1 C
ANCEL
button: To cancel the print job that is currently printing, press the C
ANCEL
button.
2 G
O
button: To print a Demo page or to continue printing while in manual feed mode, press and
release the G
O
button. To print a Configuration page, press and hold the G
O
button for 5 seconds.
3 Go light: Indicates that the printer is receiving data when flashing.
4 Ready light: Indicates that the printer is ready to print.
5 Attention light: Indicates that the printer media input trays are empty, the print cartridge door is
open, the print cartridge is missing, or other errors. See
Printer information pages for more
information.
6 Wireless light: (HP LaserJet 1022nw printer only) When the Wireless light is on solid, a wireless
connection has been established. When the Wireless light is off, wireless operation is disabled.
When the Wireless light is flashing, the printer is trying to establish a wireless connection.
NOTE See Status light patterns for a description of the light patterns.
ENWW Printer control panel 5