HP XP RAID Manager Software - Manual (Page 95)

Corresponding command Description Operation type
raidcom get resource Display resource group information.
raidcom add resource -resource_name
<resource group name> [-resource_id Add resource group.
<resource group_id > |-ldev_id <ldev#> |
-port <port#> | -port <port#> <host group
name> | -parity_grp_id <gno-sgno> |
-external_grp_id <gno-sgno>]
raidcom delete resource -resource_name
<resource group name> [-ldev_id <ldev#> Delete resource group.
| -port <port#> | -port <port#> <host group
name> | -parity_grp_id <gno-sgno> |
-external_grp_id <gno-sgno>]
raidcom add host_grp -port <port>
-host_grp_name <host group name> Create host group. Host
(See the manual: HP P9000
Provisioning for Open Systems
User Guide)
raidcom modify host_grp -port <port> [<host
group name>] -host_mode < host mode>
[-host_mode_opt <host mode option> … ] Set host mode.
raidcom add hba_wwn -port <port> [<host
group name>] -hba_wwn <WWN strings> Register a host to host group.
raidcom delete host_grp -port <port> [<host
group name>] Delete host group.
raidcom get host_grp -port <port> [<host
group name>] Display host group information.
raidcom modify port -port
<port>{[-port_speed <value>] Set port. Port
(See the manual: HP P9000
Provisioning for Open Systems
User Guide)
[-loop_id<value>][-topology <topology>]
[-security_switch < y/n >]}
raidcom modify port -port <port>
-port_attribute <port attribute> Set port attribute.
raidcom get port [-port <port>] Display port information.
raidcom add ldev {-parity_grp_id
<gno-sgno>| - external_grp_id <gno-sgno> Create LDEV. Internal volume
(See the manual: HP P9000
Provisioning for Open Systems
| -pool {<pool ID#> | <pool naming> |
snap}} -ldev_id <ldev#> {-capacity <size> |
User Guide or HP P9000
-offset_capacity <size> | -cylinder <size>}
Provisioning for Mainframe
Systems User Guide
[-emulation <emulation type>][-location
<lba>][-mp_blade_id <mp#>]
raidcom get ldev {-ldev_id <ldev#> … [-cnt
<count>] | -grp_opt <group option> Display LDEV information.
-device_grp_name <device group name>
[<device name>]} [-key <keyword>]
raidcom get parity_grp [-parity_grp_id
<gno-sgno>] Display parity group information.
raidcom add ssid -rcu <serial#> <mcu#>
<rcu#> <id> -ssid <ssid> Define SSID.
raidcom delete ssid -rcu <serial#> <mcu#>
<rcu#> -ssid <ssid>
raidcom add thp_pool {{-pool_id <pool ID#>
[-pool_name <pool naming>] | -pool_name Create pool for Thin Provisioning or Thin
Provisioning Z. Virtual volume
(Thin Provisioning/
<pool naming>[-pool_id <pool ID#>]} |
Thin Provisioning Z/
-pool_id <pool ID#> -pool_name <pool
naming>}} {-ldev_id <ldev#> …[-cnt<count>]
Smart Tiers/Snapshot)
| -grp_opt <group option>
Available provisioning operations 95