HP OmniBook 2000 Notebook PC User Manual
Page 16
Using the Port Replicator
Making Connections
1-16
To switch back to the internal pointing device
Use this procedure to switch back to the built-in pointing device from an external
PS/2 mouse.
1. Save your work.
2. Disconnect the mouse cable from the docking system.
3. Turn the OmniBook off, then back on.
Hint
You can also disable the external pointing device from the System Configuration
Utility.
1. Press Fn+F2 to open the System Configuration Utility.
2. Press ALT+I to open the Input/Output menu.
3. Select External Devices.
4. Select the Ignore External Pointing Device check box.
To connect a serial mouse
1. If you’re using Windows 95, go to step 2.
–or–
If you’re using Windows for Workgroups, save your work and exit Windows.
You’ll be rebooting the OmniBook.
2. Attach the serial mouse to the port replicator.
3. Dock the OmniBook in the port replicator.
4. If you’re using Windows 95, go to step 5.
–or–
If you’re using Windows for Workgroups, reboot the OmniBook.
serial port