HP 3PAR Application Software Suite for Microsoft Hyper-V - Manual (Page 80)

Failure Paths
•
Scenario 1: Session owner is invalid.
Every session command received on RMH Server is validated to originate from the same IP
address that initiated the session. If IP does not match, the command fails.
•
Scenario 2: Unable to fetch Hyper-V.
A Hyper-V is required to fetch cluster node names.
Get-EncryptedLoginPassword
Get-EncryptedLoginPassword retrieves a login password that may be use scripting.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Get-EncryptedLoginPassword-RmhServerName <RmhServerName> [-Verbose]
Table 43 Get-EncryptedLoginPassword parameters
Description Optional/Required Parameter
Host name of the RMH Server. This is
FQDN or IP address. Required -RmhServerName
Displays progress messages. Optional -Verbose
Success Paths
•
Scenario 1: Get is successful.
Get is successful.
Failure Paths
•
Scenario 1: Session owner is invalid.
Every session command received on RMH Server is validated to originate from the same IP
address that initiated the session. If IP does not match, the command fails.
•
Scenario 2: Failure to encrypt login password.
RMH Server cannot encrypt login password.
Get-RmhPolicy
The get-RmhPolicy retrieves the RMH policy settings of a Hyper-V Virtual Machine. An RMH
policy object retains the set default values for Virtual Copies. You can customize the attributes of
a Virtual Copy.
Preconditions
The user must first login with Login-Rmh.
Syntax
Any optional parameters require square brackets [ ] around them.
Get-RmhPolicy -RmhServerName <RmhServerName> -HypervName <HypervName>
-VmNameUuid <VmNameUuid> [-Verbose]
80 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands