HP StorageWorks XP10000 Disk Array - Manual (Page 74)

74
Figure 9-7 Modify Storage Tier-Storage Tier Name Pop-up Window
3. Enter the information you are changing.
Name (required)
Enter the name of the storage tier. When the Modify Storage Tier-Storage Tier Name pop-up window
displays, the current name of the storage tier displays in Name.
You can enter up to 75 bytes of UTF-8 characters.
You can use non-ASCII characters, and the following ASCII characters:
A
to Z a to z 0 to 9 - _ . @ and a single-byte space
You cannot use spaces for the first or last character of the name.
When changing attribute information for a storage tier, an error occurs if:
You have not entered a Name.
The character string you entered for Name is too long.
You entered an invalid character for Name.
Filter Condition
Enter filter condition information you are changing and click the Edit button. The new filter conditions
display.
Description
Enter a new description of the storage tier.
You can enter up to 500 bytes of UTF-8 characters.
If you enter 501 bytes or more in UTF-8 encoding for Description, an error occurs.
4. Click the Edit button.
The Edit Filter Condition pop-up window, in which you can edit the information specified as Filter
Condition in the Modify Storage Tier - Storage Tier Name pop-up window, is displayed, as shown in
Figure 9-8.