HP Integrity BL870c i2 Server-Blade - Manual (Page 16)

Command line 16
Item Description
Displays detailed information for a multi-blade server in device bays 5-8 of the
primary enclosure.
domain
Manage general Virtual Connect domain settings and information.
Supported actions: delete, help, set, show
Item Description
delete domain Delete the existing Virtual Connect domain configuration.
Deleting the domain removes the entire Virtual Connect domain configuration
and resets it to the original defaults. After the domain has been deleted, you are
logged out and the Virtual Connect Manager resets.
Syntax delete domain [-quiet]
Option
quiet Suppresses user confirmation prompts. This option is useful when scripting
delete domain operations.
Examples
->delete domain
Deletes the Virtual Connect domain configuration and prompts for user
confirmation
->delete domain -quiet
Deletes the Virtual Connect domain quietly without prompting for user
confirmation (primarily used in automated scripting scenarios)
Item Description
set domain Modify general Virtual Connect domain configuration properties, such as the
domain name, domain IP address, and MAC and WWN address pool settings.
Syntax set domain [Name=<NewName>] [DomainIp=<Enabled|Disabled>]
[IpAddress=<IPAddress>] [SubnetMask=<mask>]
[Gateway=<Gateway>] [MacType=<VC-Defined|Factory-Default|
User-Defined>] [MacPool=<1-64>] [MacStart=<MAC address>]
[MacEnd=<MAC address>] [WwnType=<VC-Defined | Factory-
Default | User-Defined>] [WwnPool=<1-64>] [WwnStart=<WWN
Address>] [WwnEnd=<WWN Address>] [SingleDense=true|false]
Properties
Name(optional) The new name of the domain. Valid characters include alphanumeric, "_", and
".". The maximum length of the name is 31 characters.
DomainIP
(optional)
Enables or disables the Virtual Connect domain IP address. If enabled, then a
valid IP address subnet mask must be configured. If disabled, then DHCP is
used to obtain a valid IP address.
Enabling domain IP address configuration or changing the domain IP address
can cause a temporary loss of connectivity to the Virtual Connect Manager. Use
caution when changing these settings. Valid values include "Enabled" and
"Disabled".
IpAddress
(optional)
A valid IP address to use for the domain IP address configuration. The IP
address must be in the format xxx.xxx.xxx.xxx, where x is a number between 0