HP LaserJet Pro M1217nfw Multifunction Printer User Manual
Page 18
Alternate method to restore the default wireless settings
a. Turn the product off.
b. Press and hold the wireless button and the cancel button, and then turn the product on.
c.
Hold the buttons until all of the lights blink in unison, and then release the buttons.
2.
Print a configuration page, and find the network name (SSID) in the Network Information section.
a. On the product control panel, press the Setup button
b. Use the arrow buttons to select the Reports menu, and then press the
OK
button.
c.
Use the arrow buttons to select the Config report option, and then press the
OK
button.
3.
Refresh the computer wireless network connection list, and then click the product network name
(SSID) and connect to it.
4.
After several minutes, print a configuration page, and then find the product IP address.
5.
At the computer, open a web browser, type the product IP address in the address box, and then
press the
Enter
key to open the HP Embedded Web Server.
6.
Click the HP Smart Install tab, and then click the Download button to install the product
software.
The figures below show the difference between an ad-hoc network connection and an infrastructure
network connection.
Ad-hoc network
Infrastructure network
10
Chapter 3 Connect the product
ENWW