HP SAN Virtualization Services Platform - Manual (Page 76)

Figure 9 System Ethernet panel
.
An amber LED indicates that the corresponding component is missing, has failed, or will likely fail
soon. Even if your DPMs appear to be performing normally, replace the part if the corresponding LED
has turned amber.
SNMP panel (system)
Figure 10 shows the SNMP panel. This panel allows SNMP v2 or v3 to be enabled or disabled. A
trap receiver can also be specified that will receive SNMP trap events from the DPM, if not enabled
during the initial installation.
Using the Data Path Module management GUI 76