Placing a call, Support phone numbers, After the phone support period – HP Deskjet F2430 All-in-One Printer User Manual

Page 43: Additional warranty options, Setup troubleshooting

Advertising
background image

Placing a call

Call HP support while you are in front of the computer and the product. Be prepared to
provide the following information:

Product name (HP Deskjet F2400 All-in-One series)

Serial number (located on the back or bottom of the product)

Messages that appear when the situation occurs

Answers to these questions:

Has this situation happened before?

Can you re-create it?

Did you add any new hardware or software to your computer at about the time
that this situation began?

Did anything else occur prior to this situation (such as a thunderstorm, product
was moved, etc.)?

Support phone numbers

For the most current HP list of telephone support numbers and call costs information, see

www.hp.com/support

.

After the phone support period

After the phone support period, help is available from HP at an additional cost. Help may
also be available at the HP online support Web site:

www.hp.com/support

. Contact your

HP dealer or call the support phone number for your country/region to learn more about
support options.

Additional warranty options

Extended service plans are available for the HP All-in-One at additional costs. Go to

www.hp.com/support

, select your country/region and language, then explore the services

and warranty area for information about the extended service plans.

Setup troubleshooting

This section contains setup troubleshooting information for the product.
Many issues are caused when the product is connected to the computer using a USB
cable before the HP Photosmart software is installed on the computer. If you connected
the product to your computer before the software installation screen prompts you to do
so, you must follow these steps:

Troubleshooting common setup issues

1.

Disconnect the USB cable from the computer.

2.

Uninstall the software (if you have already installed it).
For more information, see

“Uninstall and reinstall the software” on page 43

.

3.

Restart your computer.

4.

Turn off the product, wait one minute, then restart it.

5.

Reinstall the HP Photosmart software.

Chapter 8

40

Solve a problem

Solve a problem

Advertising