HP LaserJet 1015 Printer - Manual (Page 40)

32 Chapter 3 ENWW
Printing on both sides of the paper (manual duplexing)
To print on both sides of the paper (manual duplexing), you must run the paper through the printer
twice.
Note Manual duplexing is only supported in Windows.
Note Manual duplexing can cause the printer to become dirty, reducing print quality. See Cleaning the
printer for instructions if the printer becomes dirty.
To manually duplex
1 Access the printer properties (or printing preferences in Windows 2000 and XP). See Printer
properties (driver) for instructions.
2 On the Finishing tab (the Paper Type/Quality tab for some Mac drivers), select the option to
Print on Both Sides. Select the appropriate binding option, and click OK. Print the document.
Note Not all printer features are available from all drivers or operating systems. See the printer properties
(driver) online Help for information about availability of features for that driver.
3 After side one has printed, remove the remaining paper from the input tray, and set it aside
until after you finish your manual duplexing job.