HP StorageWorks XP Remote Web Console Software - Manual (Page 56)

2. Select and right-click the pool whose setting you want to change in the Pool tree of the Pool
window.
A pop-up menu is displayed.
Note: If the pool usage rate is 95% or higher, the pop-up menu will not be displayed.
3. Select the Change Pool Information command from the pop-up menu.
The Change Pool Information dialog box ( Figure 14 on page 56) is displayed.
4. Select the value for the threshold from the Threshold drop-down list.
Note: In the drop-down list, only the values that are higher than the pool usage rate are
displayed.
5. Click OK.
The Change Pool Information dialog box closes.
6. Click Apply.
The confirmation message is displayed asking if it is OK to apply the setting to the storage system.
7. Click OK.
The confirmation message closes and the change of the setting is applied to the subsystem.
Figure 14 Change Pool Information Dialog Box
The items in the Change Pool Information dialog box are the same as those of the New Pool dialog box.
However, in the Change Pool Information dialog box, you cannot enter or select items other than the
Threshold drop-down list. For details about the items in the Change Pool Information dialog box, see
“ Creating New Pools ” on page 54.
Deleting Pools
Usually, you specify one pool and delete only the specified pool. However, you may delete multiple pools
at a time, if necessary. This section describes the procedures for when you delete one specified pool
and when you delete multiple pools at a time.
Deleting a Pool
To delete a pool:
1. Change the mode of the Remote Web Console to Modify.
If the mode is already changed to Modify, you can skip this step. For information on how to
change the mode, see the HP StorageWorks XP24000 Remote Web Console User’s Guide.
2. Select and right-click the pool you want to delete in the Pool tree of the Pool window.
A pop-up menu is displayed.
3. Select the Delete Pool command from the pop-up menu.
A confirmation message is displayed asking if it is OK to delete the selected pool.
4. Click OK.
The icon of the selected pool changes to the icon which indicates the deleting process.
5. Click Apply.
56 Performing XP Snapshot Operations