HP LaserJet Pro CP1525nw Color Printer - Manual (Page 95)

4. Click the Automatic or Manual setting.
● Automatic setting: Select this setting for most color print jobs
● Manual setting: Select this setting to adjust the color settings independent from other settings.
NOTE: Changing color settings manually can impact output. HP recommends that only color
graphics experts change these settings.
5. Click the Print in Grayscale option to print a color document in black and shades of gray. Use this
option to print color documents for photocopying or faxing. You can also use this option to print
draft copies or to save color toner.
6. Click the OK button.
Manual color options
Use manual color options to adjust the Neutral Grays, Halftone, and Edge Control options for text,
graphics, and photographs.
Table 8-1 Manual color options
Setting description Setting options
Edge Control
The Edge Control setting determines the rendering
of edges. Edge control has two components: adaptive
halftoning and trapping. Adaptive halftoning
increases edge sharpness. Trapping reduces the
effect of color-plane misregistration by overlapping
the edges of adjacent objects slightly.
● Off turns off both trapping and adaptive halftoning.
● Light sets trapping at a minimal level. Adaptive halftoning is on.
● Normal sets trapping at a medium level. Adaptive halftoning is on.
● Maximum is the most aggressive trapping setting. Adaptive
halftoning is on.
ENWW Adjust color 81