HP 8.20q Fibre Channel Switch - Manual (Page 80)

80
After an NDCLA operation is complete, management connections must be re-initiated:
• QuickTools sessions will re-connect automatically
• Telnet sessions must be restarted manually.
Future switch firmware releases will support non-disruptive upgrades unless specifically indicated in its
associated release notes.
An NDCLA operation to earlier switch firmware releases is not supported.
The Load Firmware dialog box for a single switch (
Figure 41 ) or for a stack ( Figure 42 ) enables you to
select and install a firmware image file. To open the Load Firmware dialog box for an individual switch,
select Switch > Load Firmware, or for a stack, select Stack > Load Firmware. When the Load Firmware
dialog box is opened, the path displayed in the Firmware Image Folder field is automatically searched for
firmware image files that can be installed. The default path to search for firmware image files is the user's
working directory.
To change the search path:
1. Click Browse and select a new path.
2. Click Rescan to search the folder displayed in the Firmware Image Folder field. The firmware image files
found are listed in and can be selected from the Version drop-down list.
Figure 41 Load Firmware dialog box for a single switch
Figure 42 Load Firmware dialog box for a stack