HP Deskjet Ink Advantage Printer - K109a - Manual (Page 31)

c. Line up colored shaped icons, then slide cartridge into slot until it clicks into place.
d. Close cartridge door.
Related topics
• Choose the right cartridges
• Order ink supplies
Use ink-backup mode
Use the ink-backup mode to operate the HP Printer with only one print cartridge. The ink-
backup mode is initiated when a print cartridge is removed from the print cartridge
carriage. During ink-backup mode, the product can only print jobs from the computer.
NOTE: When the HP Printer operates in ink-backup mode, a message is displayed
on screen. If the message is displayed and two print cartridges are installed in the
product, verify that the protective piece of plastic tape has been removed from each
print cartridge. When plastic tape covers the print cartridge contacts, the product
cannot detect that the print cartridge is installed.
Exit ink-backup mode
Install two print cartridges in the HP Printer to exit ink-backup mode.
Related topics
Replace the cartridges
Use ink-backup mode 29
Wo
rk
with
c
ar
trid
g
es