HP Latex 210 Printer - Manual (Page 19)

3 Basic setup options
Printer setup options
Change the language of the front panel
Two methods are available to change the language that is used for the front-panel menus and
messages.
● If you can understand the current front panel language, go to the front panel and select the
icon, then select Front panel options > Select language.
● If you cannot understand the current front panel language, start with the printer powered off. At
the front panel, press the OK button and hold it down. While holding down the OK button, press
the Power button and hold it down. Continue to hold down both buttons until the green light on the
left side of the front panel starts flashing, then release both buttons. You can expect a delay of
about one second. If the green light starts flashing without any delay, you may need to start again.
Whichever method you used, the language selection menu should now appear on the front panel.
Highlight your preferred language, then press the OK button.
View or set the date and time
To view or set the printer's date and time, go to the front panel and select the icon, then Front
panel options > Date and time options.
Set altitude
If your printer is operating at a significant altitude above sea level, go to the front panel and select the
icon, then Select altitude, to tell the printer its operating altitude.
ENWW Printer setup options 15
Basic
setu
p options