HP Latex 210 Printer - Manual (Page 27)

The Program for the Endorsement of Forest Certification label demonstrates that certified
HP papers come from forests that are managed sustainably.
Unprinted HP Heavy Textile Banner, HP Light Textile Display Banner and HP Wrinkle-
free Flag with Liner are Oeko-Tex-certified according to Oeko-Tex Standard 100, which
is a globally uniform testing and certification system for textile raw materials,
intermediate and end products at all stages of production. Tested for emissions of
chemicals such as pesticides, allergy-inducing dyestuffs or tin-organic compounds.
Greenguard HP PVC-free Wall Paper printed using HP Latex Inks is listed in the GREENGUARD
product list of low-emitting products and is tested to the GREENGUARD Children &
Schools standard. The print is neither GREENGUARD nor GREENGUARD Children &
Schools Certified. The GREENGUARD Environmental Institute is an American National
Standards Institute (ANSI) authorized standards developer that establishes acceptable
indoor air standards for indoor products, environments, and buildings.
See
http://www.greenguard.org/ .
AgBB The Committee for Health-related Evaluation of Building Products, AgBB, establishes the
fundamentals for a uniform and reproducible health-related evaluation of building
products in Germany, including criteria for testing and an evaluation scheme for health-
related evaluation of volatile organic compound (VOC) emissions from building
products used for application indoors.
Porous substrates
Substrates of limited porosity may be used with this printer, but very porous substrates could damage
the printer.
To check the porosity of your substrate, see the Maintenance and troubleshooting guide.
If you use a substrate that is too porous, or fail to clean the platen as recommended, you could
experience a decrease in print quality that would require a service repair not covered by your
warranty.
Load a roll onto the spindle
1. Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the
printer from moving.
ENWW Porous substrates 23
Handle the substrate