HP Latex 210 Printer - Manual (Page 45)

Load a roll onto the take-up reel (other substrates)
1. On the printer's front panel, select the icon, then select Take-up reel > Enable take-up
reel.
2. The front panel offers you the choice of loading the take-up reel immediately, or during printing.
If you decide to load the take-up reel during printing, familiarize yourself with the procedural
steps. Loading the take-up reel during printing requires you to complete the procedure while the
printer is feeding and printing substrate. Loading the take-up reel during printing saves
approximately 1 m (3 ft) of substrate.
The following steps assume that you have decided to load immediately. If you decide to load later,
during printing, you must complete the same operations without guidance from the front panel.
3. Make sure that the loading table is in its upright position.
4. Unlock the take-up reel spindle by pushing the spindle lever to its uppermost position.
ENWW The take-up reel 41
Handle the substrate